OpenCR1.0
OpenCR1.0


OpenCR1.0 高ヒット
商品番号:BTH086
¥33,000. 
数量
※倉庫間の転送により出荷に1週間ほどお時間を頂戴する場合がございます。


概要
TurtleBot3に含まれる組み込みコントローラです。
OpenCR1.0本体 1台
USB microBケーブル
1本

Items

Specifications

Microcontroller

STM32F746ZGT6 / 32-bit ARM Cortex®-M7 with FPU (216MHz, 462DMIPS)

Sensors

Gyroscope 3Axis, Accelerometer 3Axis, Magnetometer 3Axis (MPU9250)

Programmer

ARM Cortex 10pin JTAG/SWD connector

USB Device Firmware Upgrade (DFU)

Serial

Extension Pins

32 pins (L 14, R 18) *Arduino connectivity

Sensor module x 4 pins

Extension connector x 18 pins

Communication Circuits

USB (Micro-B USB connector/USB 2.0/Host/Peripheral/OTG)

TTL (B3B-EH-A / Dynamixel)

RS485 (B4B-EH-A / Dynamixel)

UART x 2 (20010WS-04)

CAN (20010WS-04)

LEDs and buttons

LD2 (red/green) : USB communication

User LED x 4 : LD3 (red), LD4 (green), LD5 (blue)

User button x 2

Powers

External input source

5 V (USB VBUS), 7-24 V (Battery or SMPS)

Default battery : LI-PO 11.1V 1,800mAh 19.98Wh

Default SMPS : 12V 5A

External output source

12V/1A(SMW250-02), 5V/4A(5267-02A), 3.3V/800mA(20010WS-02)

External battery Port for RTC (Real Time Clock) (Molex 53047-0210)

Power LED: LD1 (red, 3.3 V power on)

Reset button x 1 (for power reset of board)

Power on/off switch x 1

Dimensions (mm)

105(W) X 75(D)

Weight (g)

60

TurtleBotへ戻る


[<   LIPO Battery 11.1V 1800mAh LB-012 TurtleBot3 Burger [JP] 360 Laser Distance Sensor LDS-01 OpenCR1.0 RM-X52-TNM TB3 Waffle Plate-IPL-01 (8ea) TurtleBot3 Waffle Pi [JP]   >]